VapeOnly Arcus Battery - 900mAh

Product Introduction

VapeOnly Arcus Battery - 900mAh, is an portable device with built-in 900mAh high quality lithium battery. It supports max 17W output and no less than 0.3ohm atomizer. With the indicator light, you can know the status of the battery easily.

Recommended for use with the VapeOnly Arcus Atomizer which is located HERE. 

 

Parameters

Size: 16.8mm (D) x 59.5 (H)
Working voltage: 3.3V - 4.2V (not adjustable)
Working wattage: 7W - 17W (not adjustable)
Battery capacity: 900mAh

 

It comes with

  • 1 x Arcus battery - 900mAh
  • 1 x Manual

 

Power On: Press power button 5 times in succession within 2 seconds to turn on the battery and you will see the white LED light flashes 5 times. (Red LED light will flash 5 times if the battery is low. If this occurs please charge it up).

Power Off: Press power button 5 times within 2 seconds to turn off the battery and you will see the white LED light flashes 5 times. (Red LED light will flash 5 times if the battery is low. If this occurs please charge it up).

Power warning/indicator: Press power button when battery is on and check LED light’s color: LED light in white indicates normal voltage; when LED light in red, please charge your battery.

Short circuit: When the battery is on, if a short circuit occurs whilst connected to the battery or atomizer, the red LED light will produce a single flash 10 times and the battery will go onto standby mode when you press the power button. (If this indicator is displayed, it could be coil, atomizer or the battery short circuit. We suggest you change the coil to test firstly, if it does not work, you can try with another electronic cigarette, and connect to the coil, atomizer and battery in turn to find the fault. )

Low resistance protection: When the battery is on, atomizer will not work if its resistance is lower than 0.3Ω when you press the power button. The white LED light will double flash 5 times with the battery going to standby mode.

Open circuit: When the battery is on, if under open circuit situation or no atomizer is connected, the white LED light will have a single flash 10 times with the battery going to standby mode when you press the power button. (If this indicator is displayed, it could be coil, atomizer, or the battery open circuit. We suggest you change the coil to test firstly, if it does not work, you can try with another electronic cigarette, and connect to the coil, atomizer and battery in turn to find the fault. )

Low-voltage protection: When the battery is on and the voltage is low, hold down the power button, the white and red LED light will flash 5 times each alternatively with the battery going to standby mode and not working. Then please charge your battery.

10 seconds cut-off time: When the battery is on, if the power button is held for more than 10 seconds, the white LED light will triple flash 5 times with the battery going onto standby mode.

Overheat Protection: When the battery is on, hold down the power button, the red LED light will triple flash 5 times with the battery going onto standby mode if the temperature of the device is higher than the setting point.

Battery Overload Protection: When the battery is on, hold down the power button, the red LED light will double flash 5 times with the battery going onto standby mode if the voltage is lower than 3.5V, and the resistance is lower than 0.5Ω.